Plumbing fitting aimed at secure copper pipe reductions, promising a solder-free, compression connection that simplifies repairs and installations. Installers and keen DIYers gain confidence from durable brass construction and recognised certification. Is WRAS approval and BS EN 1254-2 compliance enough to recommend the Generic Brass Compression Reducer?
⚡ At a Glance
- • Sealing Performance: Compression mechanism designed for a secure, watertight joint on copper pipes
- • Best for: Plumbers and DIY enthusiasts needing reliable 22mm-to-15mm copper reductions
- • Not ideal for: Systems that require soldered joints or non-copper pipe materials
Brass compression reducer made for reducing 22mm pipework to 15mm without soldering. Certified to WRAS and BS EN 1254-2 and intended for copper compression pipe applications.
Secure, solder-free joints – Thanks to compression fitting design
Compression fitting design uses a compressive connection to clamp onto copper pipework, forming a joint without heat or solder. Nut and seat geometry compress the mating surfaces to create a mechanical seal.
Fast, reliable connections avoid hot-work on site and suit repairs in tight spaces. The solder-free approach reduces the need for flame-safe procedures during installation.
Durable long-lasting performance – With brass construction
Brass material provides mechanical strength and resistance to the typical stresses found in domestic plumbing. Robust construction reduces risk of deformation during tightening.
Expect dependable service in everyday domestic plumbing and central heating loops. Durable construction lowers the chance of premature failure compared with lower-grade materials.
Suitable for regulated installations – Thanks to WRAS and BS EN 1254-2 certification
Certification to WRAS and BS EN 1254-2 indicates compliance with recognised standards for compression fittings in the UK and Europe. Certified components are subject to testing for performance and suitability.
Confidence for installers specifying fittings for potable water and heating circuits where compliance matters. Certification simplifies approval during inspections and handovers.
✨ The 4 Key Reasons for Generic Brass Compression Reducer
- Solder-free installation – Speeds up installation and removes need for hot-work procedures
- Brass construction – Provides robust, long-term mechanical strength in plumbing systems
- WRAS and BS EN 1254-2 certified – Matches recognised standards expected on UK installations
- Compression reducing connector – Allows direct 22mm to 15mm copper reductions without extra adapters
📋 Technical Details at a Glance
- Category: Home Improvement / Plumbing
- Material: Brass
- Connection Type: Compression fitting
- Reducer Size: 22mm to 15mm
- Compatible Pipe Material: Copper pipe fittings
❓ Frequently Asked Questions
Q: Is soldering required to install this fitting?
A: No, the fitting is designed for compression installation and does not require soldering.
Q: Can it be used on copper pipework?
A: Yes, the fitting is described specifically for copper pipe fittings and for reducing 22mm to 15mm pipework.
Q: Does the fitting meet any recognised standards?
A: Yes, the fitting is certified to WRAS and BS EN 1254-2 according to the product information.
🏆 Our Verdict
The Generic Brass Compression Reducer suits plumbers and DIYers who need a reliable, solder-free way to reduce 22mm copper pipework to 15mm. Certification to WRAS and BS EN 1254-2 combined with solid brass construction is the key selling point. While cost varies by supplier, the certified build and durable materials suggest good long-term value for regulated installations.
