Band saw spare part that restores wheel grip and blade tracking for routine maintenance. Ideal for hands-on woodworkers who need a practical repair to keep the saw running smoothly. Is the Bordhap Band Saw Rubber Tyre the right replacement for your 12-inch scroll wheel?
⚡ At a Glance
- • Wheel Grip: Firm rubber contact keeps the blade tracking true and reduces slippage
- • Best for: DIY woodworkers and small workshop owners replacing worn wheel tyres
- • Not ideal for: Specialist industrial saws or non-scroll wheel systems with non-standard rim sizes
Two-piece rubber tyre set for band saw scroll wheels, supplied as a pair. Installation requires cleaning the rim, fitting the tyre, gluing and a 24-hour cure before use.
Steady blade tracking, thanks to a rubber tyre fit
The tyre slides onto the wheel rim and is rolled with a short pipe to equalise elasticity; adhesive is applied around the rim to secure full contact. The two-piece format allows even seating on a split wheel rim.
Consistent tracking reduces blade drift and improves cut accuracy, particularly on long or curved cuts.
Quick DIY replacement, with a simple step-by-step fit method
Begin by unplugging the saw and easing blade tension, remove the blade and the old tyre residue, then slide the new tyre on and roll it around the rim to seat evenly. A small amount of glue is brushed on before final seating.
Fitment can be completed using basic workshop tools, limiting downtime and avoiding specialist servicing.
Secure bonding for workshop use, with glue-on installation
Apply a thin bead of adhesive around the rim with a brush, roll the tyre to ensure full contact and repeat as needed; allow the adhesive to cure. The instructions advise a full 24-hour cure before returning the saw to service.
Once cured, the bonded tyre provides a reliable grip suitable for typical woodworking tasks and routine workshop use.
✨ The 4 Key Reasons for Bordhap Band Saw Rubber Tyre
- Two-piece set - Replaces both wheel tyres for consistent blade tracking and balance
- Easy fit method - Installation completed using basic tools and straightforward steps
- Glue-on bonding - Adhesive cure secures tyre for reliable workshop use over time
- Suitable for 12-inch wheels - Matches common scroll wheel dimensions on many band saws
📋 Technical Details at a Glance
- Category: Home Improvement
- Fitment: 12-inch band saw scroll wheel
- Material: Rubber tyre (two-piece)
- Quantity: 2 pieces
- Compatibility: Designed for scroll wheels on 12-inch band saws
❓ Frequently Asked Questions
Q: How do I fit the replacement tyre?
A: Unplug the saw, loosen blade tension and remove the blade, then remove the old tyre and any residue. Slide part of the new tyre onto the rim, roll a short rod or pipe around the rim to equalise elasticity, brush a small amount of glue onto the tyre and rim, roll to seat and allow 24 hours to dry.
Q: Is the tyre compatible with all band saws?
A: Compatibility is specified for 12-inch band saw scroll wheels; suitability for other wheel sizes or non-scroll wheel systems is not provided.
Q: How long before I can use the saw after fitting?
A: Allow the adhesive to dry for 24 hours before returning the saw to use.
🏆 Our Verdict
The Bordhap Band Saw Rubber Tyre is well suited to DIY woodworkers and small workshops needing a practical replacement for worn wheel tyres. The two-piece rubber tyre uses a roll-and-glue fit method that restores grip and blade tracking while keeping fitment simple. A reliable cure and correct installation deliver long-term service and reduced workshop downtime.
