The RC crawler replacement part lets builders alter wheelbase and secure wheels for rough terrain. For anyone who modifies 1/10 scale crawlers, sourcing map Aluminum Wheel Hex Hub brings adjustability and a firmer mounting point. Is such a mechanical upgrade the right match for your next build?
⚡ At a Glance
- • Mounting Fit: Designed for 12mm hex length with a 14mm hole inner diameter, fits typical 1/10 crawler axles
- • Best for: Hobbyists and tuners who want to change wheelbase and secure wheels on 1/10 RC crawlers
- • Not ideal for: Models or axles that do not match the listed 12mm hex or 14mm inner diameter
Aluminium hex hubs extend or shorten the wheelbase and lock wheels to the drive shaft. The set includes hub connectors, screws, nuts and spacers for wheel mounting.
Adjust Wheelbase Precisely - with the 12mm hex extension
A 12mm hex length and 14mm hole inner diameter move the wheel mounting point outward, while included spacers allow fine adjustments. Screws and M4 nuts secure the hub to the rotating shaft to hold the chosen offset.
Ability to add or reduce wheelbase helps tune handling and clearance for different terrains. Simple hardware changes let builders dial in stance without replacing major components.
Improved Durability - thanks to CNC aluminium alloy construction
Aluminium alloy hubs are manufactured using CNC machining, creating precise mating surfaces and consistent tolerances. The metal construction also conducts heat away from contact areas better than plastic alternatives.
Stronger hubs resist deformation under load and last longer during off-road use. The metal build gives confidence when running rough terrain or heavier tyres.
Stable Wheel Mounting - with included screws, nuts and spacers
Each pack supplies rotating shaft screws, M4 nuts, and spacers to clamp the hub to the drive shaft. Tightening the hardware locks the hex to the shaft, reducing play between wheel and axle.
Securely locked wheels are less likely to loosen during runs, reducing roadside repairs. The complete kit avoids hunting for separate fasteners when fitting upgrades.
✨ The 4 Key Reasons for sourcing map Aluminum Wheel Hex Hub
- CNC Aluminium Construction - High strength and heat dissipation prolongs part lifespan
- 12mm Hex Extension - Adds 12mm to wheel offset for handling and clearance adjustments
- Complete Mounting Kit - Includes screws, nuts and spacers for straightforward installation
- Four-Pack Set - Four hub connectors supplied, enough for full axle or spares
📋 Technical Details at a Glance
- Category: Home Improvement
- Compatibility: Fit for 1/10 RC crawler, RC car
- Wheel Hex Length: 12mm (0.47 inch)
- Hole Inner Diameter: 14mm (0.55 inch)
- Nut Length: 8.9mm (0.35 inch)
❓ Frequently Asked Questions
Q: Will these hubs fit my RC crawler?
A: They are specified as fit for 1/10 RC crawlers; confirm axle hex size and hole inner diameter match 12mm and 14mm respectively before fitting.
Q: Are screws, nuts and spacers included?
A: Yes, the package contains four hub connectors plus four rotating shaft screws, four nuts and four spacers for complete mounting.
Q: Are the hubs durable enough for off-road use?
A: CNC aluminium alloy construction offers high strength and improved heat dissipation compared with typical plastic alternatives, helping durability during rough runs.
🏆 Our Verdict
Hobbyists tuning or repairing 1/10 scale RC crawlers will find the hubs well suited to straightforward wheelbase and mounting changes. CNC aluminium construction combined with included fasteners makes practical, durable upgrades for off-road use. As a simple mechanical improvement, the parts deliver clear long-term value for regular running and tweaking.
