Solder wire for electrical and electronic repairs, promising reliable low-melt joints and clean finishes. Enjoy less fuss during delicate PCB and cable work with a compact spool that fits a pocket. Is GALAMAX Solder Wire the sensible addition to your repair kit?
⚡ At a Glance
- • Flow & Wetting: Smooth flow with minimal splash and consistent wetting
- • Best for: Electronics repairers, DIY hobbyists and technicians working on small PCBs and wiring
- • Not ideal for: Plumbing or heavy mechanical soldering tasks outside electronic work
Rosin-core solder wire contains tin and 2% flux, giving a low melting point of 185 °C to 190 °C. The alloy is described as high-purity with improved electrical and thermal conductivity for reliable joints.
Secure, conductive joints - with high-purity tin alloy and improved conductivity
High-purity tin-based composition combined with a rosin-core flux promotes good tin wetting and metallurgical bonding at soldered interfaces. The core flux helps remove oxides so the alloy can form consistent metallurgical joints.
Stronger electrical connections and dependable thermal paths mean fewer intermittent faults on repaired boards. Devices return to reliable operation more often on first rework attempts.
Lower thermal stress during soldering - thanks to a low melting point (185–190 °C)
The solder melts in the 185 °C to 190 °C range, so effective soldering occurs at relatively modest iron temperatures for electronics work. The rosin flux lowers the activation temperature of surfaces, improving wetting at those temperatures.
Reduced risk of heat damage to sensitive components and quicker heat-up times speed through small repair jobs. Less time at high temperature also reduces the need for repeated rework.
Precision work on small pads and wires - with a 1.0mm wire diameter and smooth flow
A 1.0mm diameter gives fine control of solder addition, while the rosin-core ensures solder flows readily into joints without excessive splatter. Low ionic contamination means fewer corrosive residues left behind.
Easier control on tight pads, headphone jacks and fine cable joins leads to neater, professional-looking solder joints. Less cleanup is required after soldering.
✨ The 4 Key Reasons for GALAMAX Solder Wire
- 1.0mm wire - Enables precise soldering on tight PCB pads and SMT leads
- Rosin-core with 2% flux - Promotes reliable joint formation and easier solder wetting
- 100g compact spool - Fits neatly into a toolkit and stays pocket-friendly for portability
- Improved thermal conductivity - Reduces heating time for joints, increasing soldering speed
📋 Technical Details at a Glance
- Material: Tin (Sn)-based alloy
- Diameter: 1.0 mm
- Weight: 100 g
- Core type: Rosin core
- Flux content: 2% flux
❓ Frequently Asked Questions
Q: Is this solder suitable for mobile phone and motherboard repairs?
A: Yes. The description specifically lists mobile phones, computer circuit boards and motherboards among suitable applications.
Q: What is the melting point of the solder wire?
A: The melting point range is 185 °C to 190 °C, which supports low-temperature soldering for electronics.
Q: Does the wire include flux and what type is it?
A: Yes, the wire has a rosin core with 2% flux to aid wetting and cleaning during soldering.
🏆 Our Verdict
Suitable for electronics repairers, hobbyists and technicians who need neat, dependable solder joints on small components. The rosin-core, 2% flux composition and low melting point make for fast wetting and lower heat exposure. Good value for a compact, reliable spool that reduces rework and keeps a repair kit ready for frequent use.
