Replacement respirator filter cotton offers electrostatic multi-layer protection and low breathing resistance. Homeowners and tradespeople gain reassurance when tackling sanding, painting and light chemical tasks. Is Facemoon Respirator Filter Cotton the right replacement for your mask and routine?
⚡ At a Glance
- • Filtration Performance: Electrostatic multi-layer cotton captures fine particulates while maintaining low breathing resistance
- • Best for: DIYers, painters and tradespeople needing short-duration particulate protection
- • Not ideal for: Environments with oxygen below 19.5% or where gas-specific cartridges are required
Electrostatic multi-layer filter cotton compatible with many 6000-series cartridges and common respirator models, supplied as a pack of 30. Designed for particulate hazards such as dust, paint spray and grinding, with a suggested replacement interval of about 8 hours or sooner if soiled.
Effective particulate capture - thanks to electrostatic multi-layer filter cotton
Multiple layers of charged cotton use electrostatic attraction to trap airborne particles while allowing air to pass through, keeping respiratory resistance low. The charged fibres increase adsorption capacity compared with plain mechanical filtration.
Users breathe cleaner air during tasks such as sanding, painting and welding, with less effort required when inhaling.
Broad mask compatibility - with 6000-series cartridges and 501 filter retainer
Designed to sit behind 6000-series cartridges and inside 501 filter retainers, matching fitment for common respirator models listed in the description. Compatibility covers a range of masks including 6100, 6200, 6502, 7501, 7502, 6800 and FF402 types.
Filters slot into many standard masks, reducing the need to source model-specific replacements.
Plenty of spares for regular use - with a 30-piece pack and clear replacement cues
Pack contains thirty disposable filter cottons and guidance recommends replacement when cotton is damaged, dirty, odorous or when breathing resistance increases. Filters are not washable and must be discarded after use.
Thirty pieces keep spares on hand for daily tasks and minimise downtime for maintenance and filter changes.
✨ The 4 Key Reasons for Facemoon Respirator Filter Cotton
- Electrostatic multi-layer cotton - Captures fine particles while keeping breathing resistance low.
- Compatible with 6000-series cartridges - Fits many standard masks, reducing the need for model-specific parts.
- Pack of 30 filter cottons - Provides ample spares for regular or professional use.
- Clear replacement guidance - Replace after around eight hours or when soiled or damaged.
📋 Technical Details at a Glance
- Category: Replacement particulate filter cotton
- Compatibility: 6000-series cartridges; 501 filter retainer; fits 6100, 6200, 6502, 7501, 7502, 6800, FF402
- Material: Electrostatic multi-layer filter cotton
- Protection type: Particulate filtration for dust, paint, spray, grinding and welding
- Suggested protection time: Around 8 hours per filter cotton
❓ Frequently Asked Questions
Q: Are these filter cottons compatible with 3M 6200 and 6502 masks?
A: Yes, they are compatible with 6000-series cartridges and many masks including models such as 6200 and 6502.
Q: Can the filter cottons be washed and reused?
A: No, the filter cotton is not washable and should be replaced when damaged, dirty, odorous or when breathing resistance increases.
Q: How long does each filter cotton provide protection?
A: A reasonable protection time is around eight hours per filter cotton; replace sooner if the cotton becomes dirty or breathing becomes noticeably harder.
🏆 Our Verdict
Suitable for DIYers, painters and tradespeople who need disposable particulate protection that fits common masks. Electrostatic multi-layer filter cotton combined with broad compatibility and a 30-piece supply makes for practical, ready-to-use replacements. The pack size and single-use guidance deliver reliable long-term value for frequent users.
