A universal charger for 48V e-bikes and scooters, Labtec Electric Bike Charger matches six common connector types for one-plug convenience. LED status lights and built-in protections bring reassurance during overnight or roadside charging. Is broad compatibility and thermal protection enough to replace a manufacturer-specific charger?
⚡ At a Glance
- • Charging Performance: Stable 54.6V 2A output with up to 110W, LED status and automatic cut-off
- • Best for: Owners of 48V e-bikes, scooters, mobility scooters and hoverboards needing one charger
- • Not ideal for: Lead-acid battery packs, explicitly stated as incompatible
Six interchangeable connector options suit a range of 13S 48V lithium batteries. Overvoltage, overload and short-circuit protections combine with an aluminium heat sink to manage safety and heat.
Universal compatibility – With a 6-in-1 connector set
Includes multiple tip sizes, listed as 5.5 x 2.1mm and 5.5 x 2.5mm, plus RCA, 3-pin GX12, 3-pin GX16, 3-pin XLR (1+, 2-) and a T-shaped charging connector. Plug-and-play selection lets users match the correct tip to many common 13S 48V battery ports.
One charger can service different e-bikes, scooters and mobility aids without buying separate units. Swapping connectors keeps charging simple when using more than one vehicle or a borrowed battery.
Hands-off charging safety – Thanks to LED status and automatic shut-off
An intelligent LED indicates charging status, red while charging and green when fully charged, and the supply automatically turns off after full charge. Built-in protections guard against short circuit, overload and overvoltage events.
Users can charge overnight with visible status and reduced risk of overcharging. Protections help preserve battery health and reduce the chance of electrical faults.
Controlled temperatures for longer life – With aluminium heat sink and thermal design
An aluminium heat sink and an airflow-oriented casing provide passive cooling, dispersing heat generated during the 54.6V 2A charge cycle. Thermal design follows hot-air flow principles to improve heat dissipation.
Lower operating temperatures reduce stress on components, extending service life and maintaining consistent charging performance. Regular use is less likely to trigger thermal-related cut-outs.
✨ The 4 Key Reasons for Labtec Electric Bike Charger
- 6-in-1 connector kit – Charge a variety of 48V e-bikes and scooters easily
- Universal AC input 100-240V – Use worldwide mains without needing voltage converters or adapters
- Automatic cut-off with LED indicator – Stops charging when full, prevents overnight overcharging and waste
- Robust safety and cooling – Protects against short circuits, overloads and overheating during use
📋 Technical Details at a Glance
- Output Voltage: 54.6V
- Output Current: 2A
- Input Voltage: AC 100-240V
- Maximum Power: 110W
- Compatible Battery: 13S 48V lithium battery
❓ Frequently Asked Questions
Q: Is this charger compatible with my 48V e-bike battery?
A: Suitable for 13S 48V lithium batteries and commonly used on e-bikes and scooters, as long as the battery is a 48V lithium pack. Match the correct connector tip before charging.
Q: Can the charger be used abroad on different mains voltages?
A: Yes, the input supports AC 100-240V, so it works with a wide range of mains voltages when paired with the correct plug adapter for local sockets.
Q: How does the charger indicate when a battery is fully charged?
A: An LED shows charging status, glowing red while charging and switching to green when the battery is fully charged, then the power automatically turns off.
🏆 Our Verdict
Suited to owners of multiple electric vehicles, mobile scooter users and commuters who need one charger for several 48V lithium batteries. Universal connectivity through a 6-in-1 set, visible charging status and built-in protections form the main selling point. While cost considerations will vary, broad compatibility and thermal and safety features make it a practical long-term replacement for single-use chargers.
