Electronics accessory designed to enable stable PCIe connections between Raspberry Pi 5 and NVMe SSD shields. Hobbyists and makers gain confidence when fitting SSDs into compact projects with tidy cabling and included mounting parts. Is GeeekPi FPC Cable Set the right fit for your Raspberry Pi 5 build?
⚡ At a Glance
- • Signal Integrity: 16-pin, 0.5mm pitch FPC maintains reliable electrical contact for PCIe connections
- • Best for: Raspberry Pi 5 users attaching PCIe to NVMe SSD adapters and compact SBC projects
- • Not ideal for: Setups that require cable lengths longer than 80mm due to transmission risks
The set contains 16-pin, 0.5mm-pitch FPC cables in three lengths for PCIe-to-NVMe shield connections. Included mounting pillars and screws help secure M.2 drives to shields without sourcing extra hardware.
Broad Compatibility – with 16-pin, 0.5mm-pitch FPC
A standard 16-pin FPC connector at 0.5mm pitch matches the pinout used by many Raspberry Pi 5 PCIe-to-NVMe adapter shields. The listing explicitly names supported adapters N04, N05, N10, N12, N20, N21, B12, B14, W01, M01, M02, NVDAC, NVDigi and U5000.
Direct compatibility with common adapter models means fewer compatibility headaches when fitting NVMe drives to Raspberry Pi 5 shields.
Flexible Installation – with three cable lengths (40mm, 60mm, 80mm)
Supplied cables measure 40mm, 60mm and 80mm, letting builders choose the shortest practical run to reduce bending and strain. The manufacturer warns that cables longer than 80mm can increase the probability of unstable data transmission.
Selecting the correct length helps keep layouts compact and reduces the risk of transmission instability in small enclosures.
Ready to Mount – with included M2 iron pillar and M.2 screws
Package contents list one M2 iron pillar, one hard drive copper pillar and two M.2*3 flat head screws alongside the three FPC cables. These parts match common M.2 mounting points on NVMe shields.
Mounting hardware removes the need to source extra fasteners, making assembly quicker and more secure for hobby projects.
✨ The 4 Key Reasons for GeeekPi FPC Cable Set
- Broad adapter list – Fits many Raspberry Pi 5 PCIe-to-NVMe adapter shields
- Three cable lengths – Choose the shortest run to reduce cable stress and clutter
- Quality connectors – Solid contacts lower the chance of intermittent data faults
- Included mounting kit – M2 pillars and screws secure M.2 drives without extra parts
📋 Technical Details at a Glance
- Category: Electronics accessory
- Brand: GeeekPi
- Product ID: B0D78FMKNW
- Compatibility: PCIe to NVMe SSD Adapter models N04/N05/N10/N12/N20/N21/B12/B14/W01/M01/M02/NVDAC/NVDigi/U5000
- Pin number: 16 pin
❓ Frequently Asked Questions
Q: Are these cables compatible with Raspberry Pi 5 PCIe-to-NVMe shields?
A: Yes. The cables are specified for PCIe FPC use with Raspberry Pi 5 and list compatible adapter models such as N04, N05, N10, N12, N20, N21, B12, B14, W01, M01, M02, NVDAC, NVDigi and U5000.
Q: What lengths are included in the pack?
A: The set contains three FPC cables in 40mm, 60mm and 80mm lengths to suit different layouts.
Q: Can I use a cable longer than 80mm for a tidier routing?
A: The manufacturer notes that cables longer than 80mm have a certain probability of unstable data transmission and therefore recommends avoiding excessive length.
🏆 Our Verdict
The GeeekPi FPC Cable Set is ideal for Raspberry Pi 5 enthusiasts who need to connect PCIe-to-NVMe adapter shields in compact builds. The three lengths, 16-pin 0.5mm pitch compatibility and included mounting hardware make integration straightforward and dependable. Practical and well-specified for long-term tinkering, it reduces hassle and keeps projects neat.
