A woodworking auger designed for deep, accurate holes in timber and landscaping jobs, promising precise starts and fast chip clearance. Tradespeople and keen DIYers gain faster, neater results and less clearing up on-site. Is the hsawbit Wood Drill Bit the rugged, long-reach solution needed for heavy timber and stump work?
⚡ At a Glance
- • Cutting Quality: Four cutting spurs combined with a three-flute geometry for efficient chip evacuation and cleaner hole edges
- • Best for: Gardeners, joiners and plumbers who need long-reach drilling into timber and PVC
- • Not ideal for: Drilling metal or masonry applications
10mm diameter auger with 600mm length, point tip and hardened carbon steel construction. Suitable for soft and hard woods, MDF, plywood, landscape timber and PVC pipe installation, not for metal.
Accurate starts and depth control – thanks to point tip and non-threaded self-positioning design
Point tip gives a clear centre for the cutter to bite while the non-threaded positioning allows the bit to be set at depth and withdrawn without the pull of a threaded screw. The design aids controlled entry and repeatable hole placement.
Precise hole placement reduces wandering and makes long bores into stumps or timber far easier to manage and align.
Faster cutting and cleaner holes – with three-flute form and four cutting spurs
Three flutes create channels for chips to escape quickly, while four cutting spurs score the hole perimeter to limit tear-out. High-strength carbon steel undergoes multiple hardening treatments to keep edges sharp longer.
Drilling stops less frequently for clearing chips, producing neater holes in both soft and hard woods.
Long reach for deep work – thanks to 10mm x 600mm construction
A 600mm overall length provides reach through thick timbers and landscape sections without extensions, while a 10mm diameter maintains a focused, tidy bore. The single-piece build preserves rigidity along the length.
Makes through-boring and deep stump or pipe-penetration tasks achievable with a single bit rather than multiple extensions.
✨ The 4 Key Reasons for hsawbit Wood Drill Bit
- Three-flute geometry – Rapid chip ejection for uninterrupted drilling and cleaner hole finishes
- 10mm x 600mm reach – Reaches deep timbers and stumps without extensions on most jobs
- Hardened carbon steel – Resists wear for prolonged use across hardwoods and abrasive debris
- Self-positioning point tip – Enables precise starts and easier extraction at depth for accurate alignment
📋 Technical Details at a Glance
- Category: BISS
- Brand: hsawbit
- Product ID: B0D9JVT5SM
- Diameter: 10mm
- Length: 600mm
❓ Frequently Asked Questions
Q: Can this drill bit be used on metal?
A: No. The descriptions state the bit is not suitable for metal work.
Q: What materials is the bit suitable for?
A: Suitable materials include soft and hard woods, MDF, plywood, lumber, landscape timber, PVC pipe installation and boring tree stumps.
Q: How deep can I drill and can the bit be removed easily after drilling?
A: The bit is 600mm long for deep holes, and its non-threaded self-positioning design helps set depth and withdraw the bit without the pull of a threaded screw.
🏆 Our Verdict
Ideal for gardeners, joiners and plumbers who need long-reach, accurate bores in timber and landscape settings. The combination of a 600mm reach, self-positioning point tip and hardened carbon steel construction makes for quicker, cleaner holes and robust service life. Strong long-term value is likely thanks to durable materials and a design aimed at heavy timber work.
