A roof flashing for flue pipes that copes with high temperatures, StoveMaestro Roof Flashing for Flue Pipes. Confidence for installers who want a neat, trim-to-fit finish and straightforward fitting. Does the temperature rating and base size suit every roof and stove set-up?
⚡ At a Glance
- • Heat Resistance: Rated for 150°C continuous use and up to 200°C intermittently
- • Best for: DIYers and professional stove fitters needing a simple, trim-to-fit roof seal
- • Not ideal for: Set-ups requiring built-in fixing hardware, since a separate fixing kit is sold separately
Heat-resistant roof flashing with a 221mm square base that suits pipe external diameters from 5mm to 125mm. Temperature rating is 150°C continuous and 200°C intermittent.
Neat, adaptable finish with a trim-to-fit square base
Base dimensions measure 221mm by 221mm and the material trims cleanly to size so installers can shape the aperture to match pipe diameter. The square base design keeps the seal centred and simple to align with roof tiles or slates.
A customised fit around the flue pipe reduces gaps and the need for additional flashing work. Faster trimming means less time on the roof and a tidier final appearance.
High temperature tolerance with a rated thermal limit
Temperature performance is specified as 150°C for continuous duty and 200°C for intermittent peaks. The rating ensures compatibility with typical stove flue temperatures under normal and occasional heavier loads.
Suitable for most wood-burning stove and flue installations where sustained heat is expected. The higher intermittent rating adds a safety margin during heavier use.
Quick installation with simple trimming and fitting
Material trims easily by hand or with basic tools so installers can adapt the opening on site. Compatibility with a separately sold fixing kit named StoveMaestro DFK1 allows choice of fastening method.
Straightforward trimming and a clear base size speed up installation for both experienced fitters and competent DIYers. Option to buy a dedicated fixing kit makes securing the flashing flexible depending on roof type.
✨ The 4 Key Reasons for StoveMaestro Roof Flashing for Flue Pipes
- Trim-to-fit base - Allows accurate custom sizing for different flue diameters
- 221mm square base - Provides a stable area for sealing around roof tiles or slates
- Separate fixing kit available - Lets installers choose the appropriate fastening method
- Easy to cut and fit - Reduces installation time and simplifies on-roof adjustments
📋 Technical Details at a Glance
- Category: Home Improvement
- Base dimensions: 221mm x 221mm
- Pipe compatibility: Suits pipe external diameters 5mm - 125mm
- Temperature rating: 150°C continuous
- Intermittent temperature: Up to 200°C intermittently
❓ Frequently Asked Questions
Q: What pipe sizes will the flashing accommodate?
A: The flashing suits pipe external diameters from 5mm up to 125mm, with a 221mm square base that can be trimmed as required.
Q: What temperature limits does the flashing have?
A: Continuous use is rated to 150°C and intermittent peak temperatures up to 200°C are supported.
Q: Is a fixing kit included with the flashing?
A: A separate fixing kit is available and sold separately; look for the StoveMaestro DFK1 kit on Amazon.
🏆 Our Verdict
Suitable for installers and competent DIYers fitting wood-burning stoves who need a straightforward, heat-rated roof penetration solution. The key advantage lies in the trim-to-fit 221mm base combined with a 150°C continuous, 200°C intermittent temperature rating. Upfront cost considerations may vary, but long-term value comes from reliable heat performance and quicker installations.
