Exhaust repair hardware, the Gilen Exhaust Clamp, clamps 65mm tail pipes securely with a galvanised stainless finish. Enjoy quick, stress-free repairs that keep garages moving. Are heavy-duty, no-weld clamps the right fit for routine exhaust maintenance?
⚡ At a Glance
- • Clamping Strength: U-bolt and saddle flange with two M8 nuts provide a firm, heat-resistant hold
- • Best for: DIY mechanics and professional garages needing fast, no-weld exhaust repairs
- • Not ideal for: Permanent welded joins or pipes with non-standard diameters
Galvanised stainless U-clamp with U-bolt, saddle flange and two M8 nuts. Supplied as a pair sized for 65mm outer diameter exhaust pipes.
Tight, leak-free joins - thanks to U-bolt, saddle flange and M8 nuts
U-bolt wraps around the pipe while the saddle flange spreads the clamping load; two M8 nuts allow the join to be tightened evenly for a secure clamp. The shaped saddle reduces point pressure and helps maintain pipe shape.
Creates secure seals at muffler inlets, outlets and elbow joints, reducing gas and noise leaks without deforming pipes.
Fast, no-weld fitting - with a simple U-bolt and nut assembly
No-weld installation requires placing the U-bolt and saddle over the joint and tightening the M8 nuts by hand tools. The mechanical clamp design gives repeatable clamping torque without specialist welding equipment.
Enables quick roadside or workshop repairs using common spanners, saving time and avoiding the need for welding.
Corrosion resistance for longer life - thanks to stainless steel and galvanised finish
High-quality stainless steel construction combined with a galvanised coating resists rust, scratches and wear typical around exhaust systems. The finish helps protect mating surfaces from accelerated corrosion.
Stays serviceable in damp or salty conditions, extending time between replacements and reducing maintenance frequency.
✨ The 4 Key Reasons for Gilen Exhaust Clamp
- Galvanised stainless steel - Resists corrosion and wear for long-lasting exhaust repairs
- No-weld design - Fit and tighten nuts for fast installation in minutes
- U-bolt with saddle flange - Creates a secure, vibration-resistant clamp around 65mm pipes
- Pack of two clamps - Spare clamp allows simultaneous repair of both inlet and outlet
📋 Technical Details at a Glance
- Category: Exhaust clamp
- Brand: Gilen
- Material: Stainless steel
- Finish: Galvanised
- Inner Diameter: 65mm
❓ Frequently Asked Questions
Q: Will these clamps fit a 65mm exhaust pipe?
A: Yes. Each clamp has a 65mm inner diameter and is sized to fit 65mm outer diameter pipes.
Q: Do I need to weld the clamp in place?
A: No. The no-weld design uses a U-bolt, saddle flange and M8 nuts so installation requires only tightening with spanners.
Q: Are the clamps suitable for outdoor use and exposure to road salt?
A: Galvanised finish combined with stainless steel construction improves resistance to corrosion, wear and scratches common in outdoor exhaust environments.
🏆 Our Verdict
Ideal for DIY mechanics and garages that need a quick, reliable repair for 65mm exhaust pipes. Galvanised stainless construction, U-bolt and saddle flange design plus a no-weld fit deliver secure, low-damage seals. Durable materials and simple fitting make the clamps a practical long-term repair solution.
