Fastener designed to secure shafts and wheel hubs with slotted cotter-pin retention, sourcing map Hexagon Slotted Nut. A reassuring choice for mechanics and home DIY enthusiasts who need reliable locking of bearings and hubs. Is this the right nut for your repair kit?
⚡ At a Glance
- • Material & Finish: Zinc-plated carbon steel, grade 4.8, for surface protection and mechanical use
- • Best for: Securing front wheel bearings and hubs, and general mechanical repair work
- • Not ideal for: Applications requiring non-M24 threads or different cotter pin dimensions
Slotted hexagon nut supplied with M24 thread and 1.5mm pitch. Designed to accept a 2.5x20mm cotter pin for positive locking.
Secure shaft locking - With slotted design for cotter pin retention
Slots measure approximately 7mm wide to accept a cotter pin and align with a drilled shank fastener. The slot geometry holds a 2.5x20mm cotter pin to prevent rotation under load.
Positive locking prevents loosening from vibration, ideal when securing wheel bearings and hubs during maintenance.
Corrosion-resistant finish - With zinc-plated carbon steel construction
Zinc plating creates a protective layer over the carbon steel substrate, and the item is specified as grade 4.8. The finish reduces surface corrosion in workshop and outdoor environments.
Maintains appearance and function in typical repair settings, reducing the need for frequent replacement.
Standard fitment - Thanks to M24 thread and measured dimensions
Thread size is M24 with a 1.5mm pitch, width across flats 35.5mm, overall height 24.9mm, and full thread height 16.1mm. Dimensions align with common M24 fastener requirements.
Straightforward to match and replace in equipment that uses M24 nuts, simplifying maintenance and parts sourcing.
✨ The 4 Key Reasons for sourcing map Hexagon Slotted Nut
- Slotted Nut Geometry - Allows positive cotter pin locking for secure wheel assemblies
- M24 Thread - Fits standard M24 shafts with a 1.5mm thread pitch
- 7mm Slot Width - Accepts 2.5x20mm cotter pins in typical truck hub assemblies
- 35.5mm Across Flats - Matches standard spanners for straightforward tightening and removal
📋 Technical Details at a Glance
- Brand: sourcing map
- Category: Hexagon slotted nut
- Material: Zinc-plated carbon steel
- Thread Size: M24
- Thread Pitch: 1.5mm (0.06")
❓ Frequently Asked Questions
Q: What thread size and pitch do these nuts use?
A: Thread size is M24 with a 1.5mm thread pitch, also noted as 0.06 inches in the product details.
Q: Can these nuts accept a cotter pin for locking?
A: Yes, the slotted design accepts a cotter pin, with slot width around 7mm and a stated fit for 2.5x20mm cotter pins.
Q: Are these suitable for use on truck wheel bearings and hubs?
A: They are commonly used to secure front wheel bearings and hubs to main shafts on trucks, and are suitable for repair and maintenance in workshops and garages.
🏆 Our Verdict
The sourcing map Hexagon Slotted Nut is suitable for mechanics and DIYers needing reliable cotter-pin locking on M24 shafts. Slotted geometry combined with zinc-plated carbon steel construction makes it practical for workshop repairs and vehicle hub applications. While cost will vary by supplier, the standard sizing and durable finish deliver useful long-term value for maintenance tasks.
