Kitchen faucet filtration with a 13-stage cartridge and a hydro-powered LED that reports filter life. BLINGARTY Faucet Mount Water Filter gives clearer-tasting water and visible status for peace of mind at the sink. Will the display, high-capacity cartridge and included adaptors suit most UK taps?
⚡ At a Glance
- • Filtration Performance: 13-stage system reduces chlorine, asbestos, particulates, benzene, taste and odour, removing sand and plankton.
- • Best for: Households seeking better-tasting tap water without alterations to existing plumbing.
- • Not ideal for: Pull-out faucets, square-spouted taps and induction-style faucets that cannot accept the mount.
Faucet-mounted filter with an activated carbon fibre cartridge and food-grade ABS housing. Hydropower-driven LED shows water temperature and remaining filter life when switched to filtered mode.
Clearer-tasting tap water - thanks to 13-stage precision filtration
Thirteen filtration stages combine activated carbon fibre media and a non-woven prefilter to trap sediments and adsorb chlorine, benzene and other organic tastes and odours.
Noticeably fresher water for drinking, cooking and kettles, with fewer visible particles and reduced off-flavours.
Visible filter life and temperature - with patented turbine hydropower LED display
Water flow drives a small turbine that generates electricity to power the LED display; the screen activates only when switched to the filtered mode and reports water temperature and remaining filter lifespan.
Immediate feedback on remaining cartridge life removes guesswork and helps plan timely replacements.
Less frequent changes - thanks to a high-capacity activated carbon fibre cartridge
Activated carbon fibre offers strong adsorption capacity while the non-woven layer captures larger particles; one cartridge is rated to purify around 2900 litres of water.
Longer run-time between replacements makes the system practical for busy households and regular kitchen use.
✨ The 4 Key Reasons for BLINGARTY Faucet Mount Water Filter
- 13-stage Filtration - Removes 99.9% of chlorine and many particulates, for clearer tasting water
- Hydropower LED Display - Shows real-time filter life and water temperature clearly
- High-Capacity Cartridge - Purifies around 2900 litres before replacement is needed
- 12 Included Adaptors - Fits most fixed spout taps without drilling or plumbing
📋 Technical Details at a Glance
- Product Type: Faucet-mounted water filter
- Filter Stages: 13-stage precision filtration
- Removes: Chlorine, asbestos, particulates, benzene, taste and odour; sand and plankton
- Cartridge Material: Activated carbon fibre with non-woven prefilter
- Filter Capacity: Approximately 2900 litres per cartridge
❓ Frequently Asked Questions
Q: Is the filter compatible with all tap types?
A: No. The system fits most fixed-spout taps using the 12 included adaptors but is not suitable for pull-out faucets, faucets with square spouts or induction-style faucets.
Q: Does the LED display need batteries or mains power?
A: No. The LED display is powered by the patented turbine hydropower system driven by water flow and only lights when switched to the filtered water mode.
Q: How long does a cartridge last and any setup tips?
A: One cartridge can purify around 2900 litres of water. Before first use, open the filter and remove the plastic covering; otherwise water will not pass through correctly.
🏆 Our Verdict
Suitable for households wanting better-tasting tap water and straightforward maintenance without plumbing changes. The hydro-powered LED life indicator combined with a 13-stage activated carbon fibre cartridge makes ongoing care transparent and effective. Expect an initial outlay, but the high-capacity cartridge and clear replacement signal deliver long-term convenience and reduced replacement frequency.
