Pneumatic tubing built for dependable air and fluid transfer in workshops, automation and DIY plumbing. Durable polyurethane construction delivers flexible routing and abrasion resistance for tradespeople and hobbyists, with sourcing map Pneumatic Tubing PU Hose. Will the size and pressure ratings match your system's needs?
⚡ At a Glance
- • Pressure Capacity: High pressure tolerance suitable for many pneumatic setups
- • Best for: Workshop pneumatics, automation lines and light plumbing repairs
- • Not ideal for: Systems requiring very large bore hoses or extreme temperature extremes
Polyurethane tubing, 4mm outside diameter with 2.5mm inside diameter and a total length of 5 metres. Working pressure rated at 170Psi with a burst pressure of 540Psi and an operating temperature range of -20℃ to 60℃.
Flexible Routing – With high-toughness PU material
High-toughness polyurethane combines elasticity and softness so the tube bends without kinking or permanent deformation. Smooth outer surface and a 0.75mm wall thickness maintain shape while allowing tight radii.
Easy to route through machinery frames, around corners and in confined spaces. Lighter than conventional rubber hoses, making installation and handling simpler for one person.
Efficient Airflow and Sealing – With concentric inner wall and smooth bore
Standard concentric-circle design and a smooth inner surface reduce friction and airflow resistance, lowering pressure loss across runs. Compatibility with common connector types and good interface sealing reduce leak risk when inserted fully.
Stable pressure delivery for pneumatic tools and actuators, with fewer pressure drops over short to medium runs. Quick, reliable connections speed up repairs and system changes.
Wide Operating Conditions – With rated pressure and temperature ranges
Working temperature spans from -20℃ to 60℃ and working pressure is rated at 170Psi, with a burst pressure up to 540Psi. The material also resists oxidation and chemical corrosion typical in industrial settings.
Suitable for compressed air, water and many fluid-transfer tasks within the stated limits. Useful for applications across automotive, electronics assembly and light industrial automation where moderate pressures and temperatures apply.
✨ The 4 Key Reasons for sourcing map Pneumatic Tubing PU Hose
- Polyurethane construction – Resistant to abrasion and chemical corrosion, extending service life
- 4mm OD / 2.5mm ID – Allows compact installation and precise fluid control in tight spaces
- Smooth inner bore – Reduces airflow resistance for steadier pneumatic performance
- 5-metre length – Covers longer runs without multiple joints, reducing leak points
📋 Technical Details at a Glance
- Category: Home Improvement / Pneumatic Tubing
- Material: PU (Polyurethane)
- Outside Diameter: 4mm (5/32")
- Inside Diameter: 2.5mm (3/32")
- Wall Thickness: 0.75mm (0.03")
❓ Frequently Asked Questions
Q: What sizes are the hose diameters and how long is the reel?
A: Outside diameter is 4mm and inside diameter is 2.5mm, supplied as a single 5-metre length.
Q: What pressure and temperature ranges can the tubing handle?
A: Working pressure is rated at 170Psi with a burst pressure of 540Psi, and operating temperature range is -20℃ to 60℃.
Q: Can the tubing carry air and water for pneumatic and irrigation use?
A: Yes, the tubing is specified for air and fluid transfer and is suitable for pneumatic systems and water flow when particle sizes are appropriate and the system stays within the rated pressure and temperature limits.
🏆 Our Verdict
The tubing suits DIYers, workshop technicians and automation engineers who need a flexible, abrasion-resistant line for compressed air and fluid runs. Durable polyurethane construction, smooth bore and clear pressure ratings make it particularly useful where compact routing and secure connections matter. For those who match fittings and operating conditions to the stated specifications, the hose represents practical long-term value thanks to its toughness and pressure tolerance.
