Plasma cutter for home workshops and light fabrication, designed to tackle painted, rusty and uneven metals with minimal slag. Reboot Plasma Cutter RBC6000L PRO combines non-touch pilot arc technology with a clear digital display for easier operation and diagnostics. Is it the right choice for hobbyists and small workshops?
⚡ At a Glance
- • Cutting Quality: Non-touch pilot arc cuts rough, painted and rusty surfaces while producing minimal slag and extending consumable life
- • Best for: Beginners, DIYers and occasional workshop users who need a portable cutter
- • Not ideal for: Continuous, heavy industrial fabrication requiring sustained high-duty cycles
Non-touch pilot arc allows contactless ignition using compressed air for cleaner cuts. A large digital screen reports air pressure, voltage and current, simplifying adjustments and faultfinding.
Clean Cuts on Rough Surfaces, with Non-touch Pilot Arc
Pilot arc creates an ionised air path so the torch does not need to touch the workpiece, enabling cutting of painted, rusty and uneven metals. Compressed air is used as the cutting medium, reducing hazards and running costs.
Cleaner edges and reduced slag speed up finishing, especially on pre-painted or corroded steel. Consumables last longer because the tip avoids direct contact with the metal.
Clear Operation and Diagnostics, with Upgraded Digital Screen
A centrally positioned digital display shows air pressure, voltage and current, and allows 2T/4T post-air and pilot arc time adjustments. The screen also reports error codes to indicate common faults.
Faster setup and fewer guesswork adjustments help newcomers get cutting quickly. Error codes make basic troubleshooting straightforward, reducing downtime.
Fast Setup and Portability, with Lightweight Build and Quick Air Coupling
Unit weight is 8.5 pounds and the torch includes a pre-installed quick air coupling and a UK-standard 240V power cord. A full set of consumables and accessories is supplied for immediate use.
Easy to carry between jobs and ready to run out of the box, useful for training, hobby projects and site repairs. Quick coupling cuts preparation time to under a minute.
✨ The 4 Key Reasons for Reboot Plasma Cutter RBC6000L PRO
- Non-touch pilot arc - Cuts painted and rusty metal without contact, reducing slag and finishing time
- 10–60A IGBT inverter - Supports clean cuts up to around 5/8 inch under 240V for versatile thickness handling
- Large digital display - Visible air, voltage and current readouts, plus error codes for fast troubleshooting
- Lightweight with quick air coupling - Easy to move and assemble, ready to cut within seconds
📋 Technical Details at a Glance
- Category: Plasma cutter
- Power input: 240V UK standard plug
- Output current: 10–60A DC (240V range)
- Alternate output: 10–35A DC (lower output range)
- Ideal clean cut (240V): 5/8 inch
❓ Frequently Asked Questions
Q: Can the cutter handle painted or rusty metal?
A: Yes, pilot arc technology allows cutting of rough, painted and rusty surfaces while producing minimal slag, according to the product description.
Q: What thicknesses can be cut cleanly?
A: Under 240V, clean cuts are quoted at about 5/8 inch with a maximum severance near 4/5 inch; in the lower output range clean cuts around 3/8 inch and a maximum of 1/2 inch are given. The product name also references a maximum cut of 20mm and a clear cut of 12mm.
Q: Is it suitable for beginners and easy to set up?
A: Yes, the unit is described as lightweight with a pre-installed quick air coupling and comes with a full accessory set, and user reviews note easy setup and beginner-friendly operation.
🏆 Our Verdict
Suited to hobbyists, trainers and light workshop users who need a portable and straightforward plasma cutter. Non-touch pilot arc, a large digital display and a 10–60A IGBT output make cutting painted or rusty metals easier and reduce consumable wear. Delivers practical long-term value for occasional users and those learning plasma cutting.
