Automotive parts designed to read fuel and water levels accurately for boats, cars, trucks and RVs, with straightforward trimming and mounting. Reliable gauge readings reduce anxiety on long trips and when afloat. Is the A ABSOPRO Fuel Sending Unit and Gauge Kit suitable for your tank and dashboard setup?
⚡ At a Glance
- • Measurement Accuracy: Standard 240–33 ohm output and a 280mm length, adjustable to match tank depth
- • Best for: Boat owners and vehicle owners who need dependable tank-level readings and straightforward installation
- • Not ideal for: Systems requiring non-standard electronic outputs or wireless level telemetry
280mm sender with a standard 240–33 ohm output for conventional dashboard gauges. Shortenable design and rotatable mounting allow fitment in varied tank layouts.
Consistent gauge readings – with 240–33 ohm standard output
Output follows a 240–33 ohm resistance range that matches many conventional dashboard fuel gauges, converting float position into a resistance signal the gauge interprets. Receiver gauges display level changes as the float moves along the sender arm.
Trusted compatibility with standard gauges reduces mismatched readings, so dashboards show reliable fuel or water levels without additional electronics.
Custom fit for varied tanks – thanks to cut-to-fit 280mm design
Sender arrives at 280mm (11 inches) and can be shortened to the exact tank depth. Central screw allows rotation so float aligns correctly after trimming.
Ability to trim length means neat installation in shallow or deep tanks and prevents float from catching on internal baffles.
Easier installation and alignment – with rotatable mounting screw
Loosening the central screw permits rotation of the sender assembly to orient the float clear of walls or baffles, then retightening secures the chosen angle. Float retaining collar must maintain minimum clearance from tank bottom.
Rotatable mounting simplifies fitting in confined spaces and helps maintain consistent readings by keeping the float free to move.
✨ The 4 Key Reasons for A ABSOPRO Fuel Sending Unit and Gauge Kit
- Adjustable 280mm length - Fit varying tank depths after simple trimming for a secure fit
- 240–33 ohm standard output - Interfaces with standard gauges for reliable level readings
- Rotatable mounting screw - Align float direction easily by loosening and tightening central screw
- 25mm float collar clearance - Maintain 25mm clearance to avoid false readings from tank obstructions
📋 Technical Details at a Glance
- Length: 280mm (11 inches)
- Output: 240–33 ohm standard
- Compatibility: Boats, cars, trucks, RVs
- Adjustment: Cut-to-fit, shortenable to tank depth
- Mounting: Rotatable via central screw for alignment
❓ Frequently Asked Questions
Q: Will this work with my existing dashboard gauge?
A: Standard output is 240–33 ohm, so compatibility depends on whether the dashboard gauge expects that resistance range. Match gauge specifications before installation.
Q: How do I fit the sender to a different tank depth?
A: Measure tank depth first, then shorten the 280mm sender to the correct length and rotate the assembly for proper float orientation before final fastening.
Q: Are there any special installation clearances to observe?
A: Float retaining collar requires at least 25 mm (1 inch) clearance from the tank bottom and adjacent walls or baffles to ensure accurate movement and readings.
🏆 Our Verdict
The A ABSOPRO Fuel Sending Unit and Gauge Kit suits boat and vehicle owners who need dependable, easy-to-fit tank-level monitoring. Adjustable 280mm length, rotatable mounting and a standard 240–33 ohm output make it compatible with many conventional dashboards. Practical and low-maintenance, it should deliver reliable service and sensible long-term value for routine level monitoring.
