Automotive exhaust wrap designed to reduce radiant heat and protect nearby components. Gain confidence that pipes run cooler and sensitive parts stay safe during spirited riding. Is CARDI Exhaust Wrap Roll the right option for DIY fitters who want durability and straightforward installation?
⚡ At a Glance
- • Heat Resistance: Withstands 500-600°C radiant heat, using basalt-based fibre and 2mm thickness for thermal insulation
- • Best for: Motorcycle and car owners wanting to reduce exhaust heat and protect nearby components
- • Not ideal for: Exhausts with heavy grease or dirt that have not been thoroughly cleaned prior to wrapping
A 10m long by 5cm wide basalt-based exhaust wrap at 2mm thickness, supplied with ten 30cm stainless-steel ties and a pair of rubber gloves. Acts as a thermal barrier to reduce heat radiation and help improve exhaust efficiency.
Lower surface temperatures - thanks to basalt-based composition and 2mm thickness
Basalt fibre is extracted from natural rock and performs differently from fiberglass, resisting carbonisation at high temperatures. The 2mm thickness increases thermal resistance and reduces radiant heat transfer from the pipe surface.
Lower external pipe temperatures protect nearby wiring, hoses and paintwork, making the exhaust area safer during and after running.
Improved exhaust performance - with better heat retention in the header
Wrapping creates a thermal barrier that helps retain heat within the exhaust gases, which can support steadier gas flow and improved scavenging compared with unwrapped headers. The wrap's insulating properties are designed to be durable under repeated high-temperature cycles.
Retained heat can aid exhaust flow and responsiveness, a practical benefit for riders seeking marginal performance and throttle feel improvements.
Secure, DIY-friendly fitting - with supplied stainless-steel ties and installation aids
The roll includes ten 30cm stainless-steel zip ties and a pair of rubber gloves to protect hands during fitting. Installation guidance recommends wetting the wrap to reduce loose fibres, making tighter, neater wraps easier, and starting flush with the flange with a 1/4" overlap.
Most competent DIYers can achieve a secure, long-lasting wrap using the supplied ties and simple wet-fit technique, provided the exhaust is thoroughly cleaned beforehand.
✨ The 4 Key Reasons for CARDI Exhaust Wrap Roll
- Included accessories - Ten 30cm stainless-steel ties and gloves for secure, ready-to-fit installation
- Generous roll length - 10m length covers multiple sections or several short systems
- Cleaner fitting method - Wetting the wrap during application reduces loose fibres for a tidier finish
- Durable and flexible - Designed to resist fraying and remain intact under repeated thermal cycles
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Brand: CARDI
- Material: Basalt-based fibre (not traditional fiberglass)
- Colour: Black
- Thickness: 2mm
❓ Frequently Asked Questions
Q: What material is the wrap made from?
A: Basalt-based fibre extracted from natural rock, described as different from traditional fiberglass and less prone to carbonisation at high temperatures.
Q: What are the roll dimensions and what comes in the pack?
A: The roll is 10 metres long and 5 cm wide with a 2 mm thickness, supplied with ten 30 cm stainless-steel zip ties and a pair of rubber gloves.
Q: How should the wrap be installed safely?
A: Clean the exhaust thoroughly to remove grease and dirt, wet the wrap during fitting to reduce loose fibres, start a full initial wrap flush with the flange or pipe edge, and use a 1/4" overlap except where bends require more; secure with the supplied ties.
🏆 Our Verdict
Wrap suits motorcycle and car owners who want accessible heat protection and a DIY-friendly installation. Basalt construction combined with a 2mm thickness and supplied stainless-steel ties delivers long-term durability and secure fastening. Durable composition and high-temperature resistance reduce the need for frequent replacement, offering good long-term value.
