YUCHENGTECH Homebrew Beer Pump is a kitchen transfer tool designed to simplify moving beer, wine and other edible liquids. Homebrewers can expect fewer spills and reduced contamination risk when racking or bottling small batches. Will food-grade construction and adjustable speed control deliver the reliability domestic brewing needs?
⚡ At a Glance
- • Suction Power: Self-priming motor delivers 4.5-5 L/min flow at 0.35-0.6 MPa, capable of lifting liquids effectively
- • Best for: Homebrewers and kitchen enthusiasts transferring beer, wine and beverages during racking or bottling
- • Not ideal for: Large-scale commercial breweries or continuous industrial pumping where higher throughput is required
Food-grade engineering plastics and a food-grade silicone hose make the unit suitable for edible liquids. A 60W pure copper motor with shock-absorbing feet keeps operation stable and relatively quiet.
Safe, sanitary transfers - with food-grade construction
Food-grade engineering plastics and a food-grade silicone hose are specified for edible liquids; two stainless-steel filters remove visible impurities while all screws use 304 stainless steel. Packing list confirms inclusion of the hose and filters.
Reduced risk of contamination during racking and bottling, allowing direct use with wine, beer and other beverages without worry.
Faster, less effort transfers - thanks to the 60W self-priming motor
Self-priming 200V pump uses a pure copper motor and efficient tail heat dissipation; rated flow is 4.5-5 L/min with a working pressure of 0.35-0.6 MPa. User feedback notes successful lifts up to around 1.5 metres for basic water-pumping tasks.
Quicker transfers than manual siphoning, speeding up bottling and racking while handling modest lifts common in home setups.
Controlled, gentle flow - with a stepless adjustable speed controller
Stepless speed controller connects to the motor and uses a knob to vary rotation speed and therefore liquid flow, allowing gradual adjustment from slow to faster transfer rates. Mechanical design and four fixed cushions reduce vibration during operation.
Fine-tune flow to minimise splashing and aeration, useful when moving delicate beers and wines that are sensitive to oxygen exposure.
✨ The 4 Key Reasons for YUCHENGTECH Homebrew Beer Pump
- 4m food-grade hose - Allows reach and can be split into inlet and outlet
- Stepless speed controller - Precisely control flow to minimise splashing and aeration
- Two stainless-steel filters - Trap visible solids and reduce sediment transfer into bottles
- Pure copper motor with cooling - Stable operation, low noise and longer service life
📋 Technical Details at a Glance
- Category: Kitchen Homebrew Pump
- Power: 60W
- Voltage: 200V
- Flow rate: 4.5-5 L/min
- Working pressure: 0.35-0.6 MPa
❓ Frequently Asked Questions
Q: Can the pump be used with beer and wine safely?
A: Yes, food-grade engineering plastics, a food-grade silicone hose and included stainless-steel filters are specified for edible liquids including wine and beer.
Q: Can the 4m hose be shortened or used as inlet and outlet?
A: Yes, the 4m hose can be cut into two sections to serve as inlet and outlet hoses as needed.
Q: What flow and lifting performance should be expected?
A: Self-priming 200V specification with 60W power delivers 4.5-5 L/min at 0.35-0.6 MPa, and user feedback reports lifting water up to about 1.5 metres.
🏆 Our Verdict
Ideal for homebrewers and small-batch beverage makers who need hygienic, low-noise transfer for racking and bottling. Food-grade construction, adjustable speed control and included hose and filters make transfers cleaner and easier to manage. Durable materials and straightforward setup point to good long-term value for hobby and kitchen use.
