Aftermarket RC shocks designed to tame rough trails and big jumps for 1/12 and 1/10 crawlers, sourcing map RC Shock Absorber. Confident handling and straightforward setup help hobbyists and racers fine-tune ride height and damping quickly. Are these shocks the right upgrade for more durable, leak-resistant suspension?
⚡ At a Glance
- • Damping Performance: Big-bore chamber with threaded bodies for controlled, consistent damping
- • Best for: 1/12 and 1/10 off-road RC crawler enthusiasts who take on jumps
- • Not ideal for: On-road miniatures or models with non-matching eye-to-eye measurements
Aluminium, big-bore shocks with threaded spring bodies for preload and height adjustment. Intended for 1/12 and 1/10 RC crawler cars with an 85mm eye-to-eye length.
Adjustable Ride Height and Preload – With threaded spring bodies
Threaded spring bodies let the spring seat be turned up or down, changing preload and locking the shock at a chosen height. Tightening the spring nut fixes the height position and alters spring force relative to vehicle weight.
Fine-tune ride height and stiffness to match payload and terrain, improving traction and cornering. Quick adjustments let setups be changed trackside without disassembly.
Stronger Impact Damping – Thanks to big-bore aluminium construction
A larger bore holds more shock oil, increasing hydraulic resistance through the piston for greater damping. Aluminium construction maintains rigidity under load, supporting consistent piston travel during hard impacts.
Absorb bigger jumps and rough hits with less bottoming out, keeping the chassis stable. More consistent damping helps maintain control during aggressive off-road runs.
Reduced Oil Leakage and Longer Service Life – With a unique sealing design
A dedicated seal arrangement combined with aluminium bodies helps prevent oil escape around the shaft and spring area. The manufacturer advises tightening the nut under the spring and using only a heavy coating of shock oil rather than filling fully.
Maintain consistent damping over longer use and reduce maintenance frequency. Simple pre-assembly checks and correct oil filling keep shocks working reliably.
✨ The 4 Key Reasons for sourcing map RC Shock Absorber
- Complete 4-shock kit – Includes screws and ball heads for direct replacement fit
- 85mm eye-to-eye length – Matches common 1/12 and 1/10 crawler mounting patterns precisely
- Preload-adjustable springs – Fine-tune spring force for weight and terrain conditions
- Sealing system – Minimises oil leakage when properly tightened before use
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Compatibility: 1/12 and 1/10 RC crawler cars
- Eye-to-eye length: 85mm (3.35 inch)
- Total length: 95mm (3.74 inch)
- Diameter: 20mm (0.79 inch)
❓ Frequently Asked Questions
Q: Are these shocks compatible with my RC crawler?
A: Designed for 1/12 and 1/10 RC crawler cars; compare the original front shock eye-to-eye distance with the 85mm eye-to-eye measurement to confirm fit.
Q: How should oil be added and how is leakage prevented?
A: Tighten the nut under the spring before use, add shock oil only to create a heavy coating without fully filling the body, and follow the sealing guidance to reduce leakage.
Q: What comes in the assembled set?
A: A set includes four shock absorbers, four M3*0.5 screws, four nuts, and four shock absorber ball head rods.
🏆 Our Verdict
Suitable for off-road RC hobbyists who demand tunable suspension for crawling and jumps. Durable aluminium construction, big-bore damping and a sealing-focused design make these shocks a practical upgrade for improved impact control. Compact, serviceable and built for repeated use, they deliver long-term value through easier maintenance and consistent performance.
