Pink Beryl Electric Strapping Tool combines tensioning, cutting and friction-fusion sealing to speed up pallet and case strapping. Warehouse operatives and small manufacturers will welcome faster cycles and less material waste during busy shifts. Does battery runtime and strap compatibility suit daily, heavy use?
⚡ At a Glance
- • Strap Compatibility: Works with PET and PP straps, compatible widths 13-16 mm and thicknesses 0.4-1.2 mm; PP requires a spring and silver gasket change for cutting
- • Best for: Warehouses, logistics teams, small manufacturers and farms needing portable, one-handed strapping
- • Not ideal for: Operations that require steel banding or strap sizes outside the 13-16 mm width and 0.4-1.2 mm thickness range
Combines tension, cutting and friction fusion sealing in one handheld unit. Dual rechargeable 3000 mAh batteries support extended outdoor packing and quick recharge cycles.
Faster, more reliable seals – thanks to friction fusion technology
Friction fusion welding melts strap material together to form a sealed joint, completing a weld in around five seconds without additional hardware. The process produces a robust seal by generating heat through controlled friction rather than relying on buckles or clips.
Much quicker cycle times reduce bottlenecks on packing lines, while stronger seals cut the risk of strap failure during transit.
Extended outdoor runtime – with two 3000 mAh rechargeable batteries
Two lithium batteries, each rated at 3000 mAh, can be recharged approximately 2000 times and reach full charge in around 90 minutes. A charged pair typically allows about four hours of outdoor operation, sufficing for roughly 100 to 220 straps per charge.
Long run time supports continuous field or warehouse use, and having two batteries reduces downtime by allowing one battery to charge while the other is in use.
Simplified, single-operator workflow – thanks to 3-in-1 tension, cut and seal design
Integrated tensioning, cutting and friction-fusion sealing removes the need for separate buckles or joints, and the mechanism is designed for one-handed operation. The consolidated process also lowers strapping roll waste by eliminating additional connection hardware.
Makes solo packing faster and neater, reduces consumable use, and keeps the operator mobile for pallet-to-pallet work.
✨ The 4 Key Reasons for Pink Beryl Electric Strapping Tool
- Dual 3000 mAh batteries - About 4 hours runtime and 100–220 straps per charge
- Friction fusion welding - Seals a strap in roughly 5 seconds for faster cycles
- 3-in-1 tension, cut and seal - Eliminates buckles and joints, reducing material waste
- Quick recharge - Full charge in around 90 minutes to minimise downtime
📋 Technical Details at a Glance
- Category: Electric strapping tool
- Brand: Pink Beryl
- Strap types: PET and PP
- Compatible strap width: 13-16 mm
- Compatible strap thickness: 0.4-1.2 mm
❓ Frequently Asked Questions
Q: Can the tool strap both PET and PP materials?
A: Yes, PET and PP straps are supported; PP strapping requires replacing the cutting spring and adding a silver gasket under the plate as per the manufacturer's instructions.
Q: How long do the batteries last and how quickly do they recharge?
A: Two 3000 mAh lithium batteries deliver about four hours of outdoor work after a 90-minute charge, and are rated for roughly 2000 recharge cycles.
Q: Is a buckle or joint required when sealing straps?
A: No, the 3-in-1 mechanism uses friction fusion welding to join straps without additional buckles or joints, reducing roll waste and saving on extra materials.
🏆 Our Verdict
Suitable for warehouse teams, logistics operators and smaller manufacturers who need portable, reliable strapping. Fast friction fusion seals, one-handed operation and dual 3000 mAh batteries set it apart for field and pallet work. While upfront cost varies, the reduced consumable use and robust runtime suggest good long-term value.
