A workshop accessory for rotary tools that speeds up surface finishing while keeping results consistent. Home DIYers and metalworkers gain reliable, even polishing with minimal scorching. Is MOGRQAP Polishing Drum the right 80 grit brush for regular workshop use?
⚡ At a Glance
- • Polishing Performance: Uniform removal of burrs and gentle surface smoothing using 80 grit nylon fibres
- • Best for: Workshop users who need consistent deburring and finishing on metal and wood
- • Not ideal for: Very fine polishing stages that require sub-micron abrasives
80 grit nylon fibres give even abrasive action across surfaces. Compatible with most rotary tools thanks to a 19mm centre hole and generous 120mm diameter.
Fast burr removal - thanks to 80 grit nylon fibres
Dense nylon fibres with 80 grit abrasives strip burrs and remove chips while containing grinding particles. Recommended working speed for the 80 grit drum sits between 2200 and 2800 RPM.
Rapid material removal tidies edges and prepares parts for the next finishing stage, saving time on repetitive deburring tasks.
Controlled heat, no discolouration - with soft, flexible nylon fibre
Soft nylon construction flexes against the workpiece and disperses heat, reducing the risk of burn marks. Cooling the workpiece with water before polishing increases hardness and wear resistance.
Surfaces remain free of blackening and heat stains, so metal and wood keep a cleaner finish after polishing.
Wide tool compatibility - with a 19mm centre hole and standard dimensions
Drum measures 120mm diameter by 100mm height, with a 19mm hole that fits most rotary tools, angle grinders, and polishing machines. The design prevents grinding particles from flying during use.
Quick fitting on dedicated machines means immediate use on common workshop equipment, provided the dimensions are checked beforehand.
✨ The 4 Key Reasons for MOGRQAP Polishing Drum
- 80 grit nylon fibres - Fast removal of burrs and quick surface preparation
- 120mm diameter - Broad coverage reduces passes per part
- 19mm centre hole - Fits most rotary tools and polishing machines
- 2200-2800 RPM recommended - Optimised speed range for consistent, safe abrasion
📋 Technical Details at a Glance
- Category: Polishing drum
- Brand: MOGRQAP
- Material: Nylon fibre abrasive
- Grit: 80 grit
- Diameter: 120mm (4.7 inches)
❓ Frequently Asked Questions
Q: Will the drum fit my angle grinder or rotary tool?
A: Check the 19mm hole diameter and the 120mm drum diameter against the machine's spindle and guard; the drum is designed to fit most rotary tools and angle grinders when dimensions match.
Q: Will polishing cause discolouration or blackening on metal?
A: No, metal and wood surfaces will not blacken or discolour due to heat, as the soft nylon fibres reduce heat buildup during polishing.
Q: What speed should be used for the 80 grit drum?
A: Use a working speed between 2200 and 2800 RPM for the 80 grit burnishing drum, as recommended for best performance.
🏆 Our Verdict
Suitable for workshop users, metalworkers and hobbyists who need reliable deburring and surface preparation. Durable nylon construction and a design that resists heat make the drum effective across metal and wood tasks. Long-lasting fibres and wide tool compatibility deliver practical value for routine finishing work.
