Gate and door hardware designed to deliver secure, long-lasting support for wooden gates and sheds. EAI Galvanised Gate Tee Hinges pair thick steel construction with a hot-dipped galvanised finish for rust resistance and reliable performance. Are these the right hinges for gates up to 1050mm wide and 40kg in weight?
⚡ At a Glance
- • Holding Strength: Handles gates up to 40kg and suitable for widths of 700–1050mm
- • Best for: Homeowners, small businesses and farms needing durable hinges for wooden gates and sheds
- • Not ideal for: Very large or very heavy gates exceeding 1050mm width or 40kg weight
Thick steel T-hinge design distributes load evenly and resists bending. Supplied as a 2-pack with all fixings for straightforward installation.
Secure Support for Heavy Gates – With thick steel construction
Manufactured from a heavy gauge steel and formed into a T strap, the hinge spreads load along the gate and post across multiple fixings. The broader metal profile resists flexing under frequent use.
Stable operation for gates within the specified weight limits, reducing sag and keeping alignment correct over time.
Long-lasting Corrosion Resistance – Thanks to hot-dipped galvanised coating
Hot-dip galvanising applies a zinc layer over the steel to create a protective barrier against rust, suitable for damp conditions and coastal exposure. The finish is applied to both faces for comprehensive coverage.
Keeps moving parts free from corrosion for longer, cutting down on maintenance and extending service life.
Even Weight Distribution – With classic T hinge design
The T-shaped strap runs along the gate while the mounting plate fixes to the post, distributing forces across several fixings rather than concentrating load on one point. This reduces stress on screws and timber.
Easier to align during fitting and less likely to pull out fixings, helping gates operate smoothly for longer.
✨ The 4 Key Reasons for EAI Galvanised Gate Tee Hinges
- All fixings included — Ready to fit straight away, no extra fasteners required
- Two-hinge pack — Supplies both hinges needed for a single gate installation
- Heavy-gauge steel — Robust construction stands up to frequent use without bending
- Suitable for varied settings — Designed for home, business and agricultural gates and sheds
📋 Technical Details at a Glance
- Category: Home Improvement
- Brand: EAI
- Material: Thick steel
- Finish: Hot-dipped galvanised coating
- Length: 350mm / 14 inch
❓ Frequently Asked Questions
Q: Are these hinges suitable for coastal properties?
A: Yes. The hot-dipped galvanised coating is specified to provide maximum rust resistance, even near the coast.
Q: What gate size and weight do these hinges support?
A: They suit gate widths from 700 to 1050mm and a maximum gate weight of 40kg.
Q: What is included in the pack?
A: The pack contains two 14-inch (350mm) tee hinges and all necessary fixings for installation.
🏆 Our Verdict
These hinges are suitable for homeowners, small businesses and farms fitting wooden gates up to 40kg and around one metre wide. Thick steel construction combined with a hot-dipped galvanised finish and classic T design gives reliable corrosion resistance and even weight distribution. Supplied as a two-hinge set with fixings, they deliver durable, low-maintenance value for longer-term gate use.
