Home maintenance parts that restore axle fit and reduce wheel wobble for garden and trade use. The Generic Wheelbarrow Wheel Bushes slot into worn hubs to convert a 35mm wheel bore down to a 1 inch axle for a firmer seating. Could replacing the bushes be quicker than fitting a new wheel?
⚡ At a Glance
- • Fit Accuracy: Adapts 35mm hub bores down to a 25.4mm (1 inch) axle
- • Best for: Gardeners and tradespeople repairing wobbling wheelbarrow or cart wheels
- • Not ideal for: Applications that require metal bearings or sealed bearing assemblies
Reducer bushes adapt a 35mm outer diameter wheel hub to a 25.4mm bore and are 17mm deep. Made from recycled plastic and supplied as a pair to aid axle friction and reduce wobble.
Secure axle seating - with 35mm to 25.4mm bore reduction
Inserts narrow the effective bore so a 1 inch (25.4mm) axle sits more snugly inside a 35mm hub, using 17mm length to locate the axle axially. The reduced clearance lessens lateral play between axle and hub.
Tighter seating reduces side play so wheels run truer and feel steadier under load.
Less wheel wobble - thanks to increased friction on the axle
Bushes act as spacer sleeves and bearing surfaces, increasing contact area between hub and axle which raises friction and limits lateral movement. The 17mm depth helps stabilise the wheel along the axle length.
Improved stability makes handling heavy loads safer and reduces knocking noises from a loose wheel.
Durable, low-maintenance repair - with recycled plastic construction
Recycled plastic resists corrosion and avoids metal-on-metal seizing, keeping shape under typical garden and building loads. The material choice reduces the risk of rust that can degrade metal spacers.
Longer service life in wet conditions and minimal upkeep compared with corroded metal alternatives.
✨ The 4 Key Reasons for Generic Wheelbarrow Wheel Bushes
- Recycled Plastic - Reduces corrosion and lasts through wet garden conditions
- 17mm Depth - Provides firm axial support to stop lateral wheel play
- Sold as a Pair - Allows both sides to be replaced for balanced wheel alignment
- Compatibility with 1 inch Axles - Enables using standard 1 inch axles on older wheels
📋 Technical Details at a Glance
- Category: Home accessory
- Brand: Generic
- Compatibility: Wheels with 35mm outer diameter that require reduction to 25.4mm bore
- Outer diameter: 35mm
- Reduced bore: 25.4mm (1 inch)
❓ Frequently Asked Questions
Q: What size reduction do these bushes provide?
A: They reduce a 35mm hub to a 25.4mm (1 inch) bore and are 17mm deep, suitable for adapting to 1 inch axles.
Q: Will these bushes help a wobbling wheel?
A: Yes, they aid friction on the axle and can help if a wheel has lateral wobble by reducing play at the hub.
Q: What are the bushes made from?
A: Made from recycled plastic, designed to resist corrosion and provide a durable sleeve for axle seating.
🏆 Our Verdict
Ideal for gardeners and tradespeople who want a quick, practical repair for loose or wobbling wheels. The clear selling point is a simple 35mm to 25.4mm bore reduction in a recycled plastic sleeve that improves axle fit and stability. Simple replacement and durable material make for good long-term value on routine wheel repairs.
