Plumbing connector designed to make changing a 90° waste run quick and secure, featuring a compression outlet for plastic and copper pipes, SHIRENOCK Waste Conversion Bend. Home renovators and DIYers gain a cleaner, faster install with no solvent welding mess. Will polypropylene construction and the 40mm compression fit hold up where longevity matters?
⚡ At a Glance
- • Connection Quality: Universal compression outlet accepts plastic and copper pipes, 90° socket to spigot orientation
- • Best for: DIY renovators and tradespeople needing fast 90° conversions on 40mm waste runs
- • Not ideal for: Installations requiring solvent-welded permanent joints or non-standard pipe diameters
A 90° socket to spigot waste conversion bend in 40mm diameter, made from polypropylene. Designed for quick connection via a universal compression outlet, with no solvent welding required.
Faster installations, with the universal compression outlet
Universal compression outlet accepts plastic and copper pipes and connects directly to standard 40mm waste runs without solvent welding. The socket to spigot 90° configuration converts alignment between two pipe ends.
Speeds up fitting time by removing the need for adhesive curing, allowing immediate checks for correct alignment and sealing.
Low-maintenance durability, with polypropylene construction
Polypropylene construction offers chemical resistance and a lightweight form factor suitable for common waste applications. Manufacturer guidance recommends exterior gloss paint for prolonged sunlight exposure.
Durable for internal plumbing and serviceable outdoors when protected from UV, reducing premature degradation concerns.
Versatile compatibility, with socket to spigot 90° geometry
The 90° socket to spigot conversion works as an interface between different pipe orientations, sized to a 40mm diameter. Compression connection accepts both plastic and copper pipe materials.
Useful for adapting runs during renovations, enabling straightforward joins between copper and plastic waste lines without extra adapters.
✨ The 4 Key Reasons for SHIRENOCK Waste Conversion Bend
- Accepts Plastic and Copper Pipes - Connect both common pipe materials without extra adaptors.
- No Solvent Welding Required - Install immediately, eliminate drying time and solvent fumes.
- Polypropylene Construction - Resists corrosion and chemicals, lightweight for easy handling.
- 90° Socket to Spigot - Create a right-angle turn without cutting and reconfiguring pipes.
📋 Technical Details at a Glance
- Category: Home Improvement
- Angle: 90°
- Connection Type: Universal compression
- Construction Material: Polypropylene
- Colour: White
❓ Frequently Asked Questions
Q: Can solvent welding be avoided with this bend?
A: Yes, no solvent welding is required, the universal compression outlet accepts plastic and copper pipes for direct connection.
Q: Is the bend suitable for external use?
A: Polypropylene construction is used, but external installations should be protected against prolonged sunlight with exterior gloss paint as recommended.
Q: What pipe size does it fit?
A: Diameter is 40 mm, designed for standard 40mm waste runs and conversions.
🏆 Our Verdict
Suitable for DIY renovators and plumbers who need a quick, reliable 90° conversion on 40mm waste systems. The universal compression outlet and polypropylene build remove the need for solvent welding, making installations cleaner and faster. Durable construction and simple fitting deliver good long-term value, especially when external runs are protected from sunlight.
